Course description
This IBM AIX System Administration training course is for System Administrators and Support Staff, who wish to perform advanced administration tasks, perform basic troubleshooting and improve security. Course Objectives are to be achieved by a mixture of command line syntax and use of the System Management Interface Tool (SMIT).
Although the course is based on AIX Version 7.1, it is also appropriate for prior releases of AIX.
Exercises and examples are used throughout the course to give practical hands-on experience with the techniques covered.
Who will the Course Benefit?...
Who will the Course Benefit?The AIX System Administration - Part II course is designed for AIX System Administrators and Programmers and other Technical IT staff who require a greater understanding of the AIX system to enable them to perform basic troubleshooting, make use of advanced security features and highlight current/potential performance issues.
Course ObjectivesOn completion of the course the delegate will have practical experience of how to troubleshoot system startup problems, perform more advanced LVM tasks, implement system security and understand the ODM files in device configuration.
Upcoming start dates
Suitability - Who should attend?
This AIX System Administration - Part II course assumes knowledge of the IBM AIX Operating System to the level covered in the AIX Basics and AIX System Administration - Part I courses.
Knowledge of AIX Shell Programming to the level covered on the AIX Shell Programming course would also be beneficial but is not essential. This skill can be gained by attending the AIX Shell Programming course.
Experience to the level as demonstrated in these courses is recommended:
- AIX Basics
- AIX System Administration - Part I
Training Course Content
AIX System Administration - Part II Training Course
Course Contents - DAY 1
Course Introduction- Administration and Course Materials
- Course Structure and Agenda
- Delegate and Trainer Introductions
- Overview
- IBM eServer (pSeries) Hardware Platform
- Brief History
- RISC Technology
- POWER 6 Product Range
- POWER 7 Product Range
- The AIX Operating System
- AIX 7 Overview of Features and Benefits
- Useful Commands
- Introduction
- ODM Components and Commands
- ODM Components
- ODM Commands - Object Classes
- ODM Commands - Objects
- ODM Commands - Descriptor Information
- Searching the ODM
- Overview of ODM Commands
- What Data is not Managed by ODM?
- The ODM Database
- Database File Names
- ODM File Locations
- cfgmgr and the ODM
- The Predefined Database Files
- PdDv - (Predefined Devices)
- PdAt - (Predefined Attributes)
- CuDv - (Customised Devices)
- CuAt - (Customised Attributes)
- ODM Class Usage
- Adding a New Device
- Additional Device Object Classes
- PdCn - (Predefined Connection)
- CuDep - (Customised Dependency)
- CuDvDr - (Customised Device Driver)
- CuVPD - (Customised Vital Product Data)
- System Startup and The Boot Process Introduction
- System Startup and the Boot Process
- AIX System Boot Sequence
- The Bootlist and BLV
- The Boot Logical Volume
- Using Bootlists
- Boot Problems
- Accessing a System That Will Not Boot Normally
- Accessing A Volume Group and Starting a Shell
- Re-creating a damaged Boot Logical Volume
- Accessing a Volume Group without mounting Filesystems
- The LED Display
- Flashing 888
- Flashing 888 Followed by 102
- Flashing 888 Followed by 103
- Interpreting Flashing 888-103 Errors
- Location Codes
- Understanding SCSI Addressing
- The Problem Summary Form
- Maintaining Firmware Levels
- Firmware From the Internet
- Inventory Scout
- Vital Product Data Upload Service
- AIX Initialisation
- Overview
- rc.boot - Phase 1
- rc.boot - Phase 2
- rc.boot - Phase 3
- More About cfgmgr
- Config_Rules Object Class
- Sample Boot Log Output
Course Contents - DAY 2
Session 4: BOOT PROBLEM MANAGEMENT- Introduction
- Boot Problem Management
- LED 553
- LED 551
- LED 552, 554, 556
- LED 523 to 534, 517, 518 and 555
- AIX Boot Diagnostic Numbers
- Local Volume Manager Review
- AIX Disk Storage
- Physical Volume and LVM
- Volume Group Descriptor Areas
- Physical and Logical Storage
- Use Of Logical Volumes
- Mirroring
- Stripping
- Volume Group Limits
- Alternative Mirroring and Stripping with RAID
- RAID Support Using AIX LVM
- Striped Column Support for Logical Volumes
- LVN System Data
- LVM Identifiers
- LVM Data on Disk Control Blocks
- Other LVM Locations
- How the LVM uses the ODM
- Physical Volumes and the ODM
- Volume Groups and the ODM
- Logical Volumes and the ODM
- LVM Problems in the ODM
- Re-synchronizing the ODM
- VGDA and Quorum
- Forcing a varyon
Course Contents - DAY 3
Session 7: DISK MIRRORING AND STALE PARTITIONS- Mirroring
- Dealing with Stale Partitions
- Mirror Scheduling Policy
- Sequential Mirroring
- Parallel Mirroring
- Mirror Write Consistency (MWC)
- Mirroring the Root Volume Group
- Overview
- Disk Replacement - Procedure 1
- Disk Replacement - Procedure 2
- Disk Replacement - Procedure 3
- Disk Replacement - Procedure 4
- Disk Replacement - Procedure 5
- Possible Errors after Disk Replacement
- Cycling LED Codes and boot Failure
- Disk in VGDA but not in ODM
- ODM Failures after Disk Replacement
- Collecting LVM Data for Recovery
- Gathering ODM Data
- Gathering LVM data in the Disk Control Block
- Korn Shell Script Debug
- Overview
- Exporting Volume Groups
- Importing Volume Groups
- Import VG Name Clashes
- Problems with Importvg
- Importing Volume Group using recreatevg
Course Contents - DAY 4
Session 10: BACKING UP YOUR SYSTEM- Overview
- Cloning
- Reducing a File System
- Alternate Disk Installation - Overview
- Installing a mksysb Image On Another Disk
- Cloning the Running rootvg to Another Disk
- Removing an Alternate Disk Installation
- Backing up Non-Root Volume Groups
- Using savevg
- Backup from a Split Mirror
- Error Log Facility
- Error Log Input Components
- Error Reporting from SMIT
- The errpt Command
- Sample Summary/Intermediate/Detailed Report Output
- Interpreting LVM Error Log Entries
- Error Log Maintenance
- Error Notification Facility
- Notification Methods
- The syslogd Daemon
- Diagnostics
- The diag Command
- Working with diag
- AIX System Dumps
- Overview
- The Dump Process
- The sysdumpdev Command
- The dumpcheck Utility
- Starting a Dump
- Initiating a Dump from a TTY
- LED Dump Codes
- Copying a System Dump
- Automatically Rebooting After a Crash
- Sending a Dump to IBM
Course Contents - DAY 5
Session 12: PERFORMANCE AND WORKLOAD MANAGEMENT- Addressing the Problem
- Understanding The Workload And Bottlenecks
- Identifying CPU Intensive Tasks
- Identifying High Priority Processes
- Monitoring CPU Usage with sar
- Monitoring Memory Usage with vmstat
- Monitoring Disk I/O Using iostat
- The topas Command
- The tprof Command
- The svmon Command
- The filemon Command
- Workload Management
- The Performance Diagnostic Tool (PDT)
- PDT Configuration Menu
- PDT File Overview
- The PDT.thresholds File
- Monitoring Files, Directories and Host Availability
- The Auditing Subsystem
- The Configuration Files
- The Object File
- The Event File
- The Config File
- Using Bin Mode
- Using Stream Mode
- The Audit Command
- Authentication and Access Controls
- Physical Security
- Login Security
- Program Security
- Path Problems
- Encrypted Filesystems in AIX 7.1
- Enhancing Login Security - Login Prompt
- Enhancing Login Security - Restricted Shell
- Customised Authentication Methods
- Two Key Authentication
- Access Control Lists
- ACL Keywords and Format
- The Trusted Computer Base
- The TCB Components
- Checking the TCB
- The sysch.cfg File
- The tcbck Command - Check Mode
- Marking Files As Trusted
- Trusted Communication Path
- Configuring Trusted Path Communications
Addendum: Reference Materials (Sections below are provided within the course handbook for additional reading)
Session 14: Appendix A- LOGICAL VOLUME SPREADING
- AIX MULTIBOS
- AIX INTRODUCTION TO NIM
Customer Outreach Award
We believe that it should be easy for you to find and compare training courses.
Our Customer Outreach Award is presented to trusted providers who are excellent at responding to enquiries, making your search quicker, more efficient and easier, too.
Reviews
Average rating 4.7
Really enjoyed this course. Trainer was very good in explaining each task.
This course has certainly helped to increase my knowledge.
Continuing Studies
Further Learning
- AIX Shell Programming
- AIX Advanced Shell Programming Tools
- Oracle SQL
- Apache Web Server
Request info
Why StayAhead. From a single person on a scheduled course to large scale training projects StayAhead Training have the expertise and experience to help. Established since 1992, StayAhead Training is recognised as one of the leading independent IT Training specialists...
well run course ....